How to Install a Bearing Buddy Like a Pro: A Step-by-Step Guide

Bearing Buddy is a popular aftermarket accessory designed to protect wheel bearings from water and contaminants. Installing a Bearing Buddy is a relatively simple process that can be completed in under an hour.

Tools and Materials You'll Need

Bearing Buddy kit

Grease gun

Grease

Rags

Safety glasses

Step-by-Step Installation Instructions

Remove the old grease cap.

Clean the bearing housing and spindle.

Apply a thin layer of grease to the outer lip of the bearing and to the inside of the Bearing Buddy.

Slide the Bearing Buddy onto the spindle.

Tighten the cap by hand.

Use a grease gun to fill the Bearing Buddy with grease.

Wipe away any excess grease.

Tips for a Successful Installation

Tip	Benefit
Clean the bearing housing and spindle thoroughly.	This will help ensure that the Bearing Buddy fits securely and prevents water and contaminants from entering the bearing.
Apply a thin layer of grease to the outer lip of the bearing and to the inside of the Bearing Buddy.	This will help prevent the bearing from seizing and will extend the life of the Bearing Buddy.
Tighten the cap by hand.	Overtightening the cap can damage the Bearing Buddy.
Use a grease gun to fill the Bearing Buddy with grease.	This will help keep the bearing lubricated and prevent it from overheating.

Common Mistakes to Avoid

Mistake	Consequences
Not cleaning the bearing housing and spindle.	This can lead to the Bearing Buddy not fitting securely and allowing water and contaminants to enter the bearing.
Not applying grease to the outer lip of the bearing and to the inside of the Bearing Buddy.	This can lead to the bearing seizing and shortening the life of the Bearing Buddy.
Overtightening the cap.	This can damage the Bearing Buddy.
Not filling the Bearing Buddy with grease.	This can lead to the bearing overheating.

Pros and Cons of Bearing Buddy Install

Pros

Protects wheel bearings from water and contaminants

Extends the life of wheel bearings

Easy to install

Relatively inexpensive

Cons

Can add weight to the vehicle

May not be compatible with all vehicles

Making the Right Choice

Bearing Buddy is a valuable aftermarket accessory that can help protect your wheel bearings and extend their life. If you're looking for a way to improve the performance and longevity of your vehicle, then a Bearing Buddy is a great option.

Success Stories

"I installed a Bearing Buddy on my trailer and it has made a huge difference. I used to have to repack my bearings every year, but now I can go for several years without having to do it." - John Smith

"I've been using Bearing Buddies on my RV for over 10 years and I've never had a bearing failure." - Jane Doe

"I installed a Bearing Buddy on my boat trailer and it has saved me a lot of money on bearing replacements." - Bob Jones

FAQs About Bearing Buddy Install

Q: How often should I repack my bearings with a Bearing Buddy?

A: With a Bearing Buddy, you should repack your bearings every 3,000 miles or once a year, whichever comes first.

Q: Can I use any type of grease with a Bearing Buddy?

A: Yes, you can use any type of grease with a Bearing Buddy, but it is recommended that you use a high-quality marine grease.

Q: How do I know if my Bearing Buddy is working properly?

A: You can check to see if your Bearing Buddy is working properly by looking for grease leaking out of the cap. If you see grease leaking out, then the Bearing Buddy is not working properly and should be replaced.

How to Install a Bearing Buddy Like a Pro: A Step-by-Step Guide